Силиконовая форма Sika в виде оленя для изготовления свечи мыла животных серии

1. Prepare enough raw materials

2. Cutting the mold(we cut some molds that are difficult to remove the finished product. If we have not cut them, please do not perform steps 2-4 and jump directly to step 5)

3. After cutting

4. Wrap the mold with rubber bds

5. Pour in the prepared raw materials

6. Wait for enough time to remove the rubber band on the mold

7. Remove the finished product from the mold

8. New finished products

1. Each mold will vary in size and size depending on the model. When purchasing our products, please determine the size of the product before deciding whether to place an order.

2. This product is cold resistant and resistant to high temperatures-76°F to + 662°F (-60°C to +350°C). Please do not exceed the scope of use.

3. Before using the mold, wash it with water to remove surface dust. This product is made of food grade silicone and can also be cleaned with hot water.

4. When cleaning the mold, wipe it with a soft cloth. Do not use rough surfaces such as steel balls.

5. After cleaning the mold, return it to the ventilated area.

6. If it is not used for a long time, it should be sealed and stored in a cool place to prevent rain and sun.

7. Avoid contact with condensation type silicone rubber vulcanizing agent during operation.