Воздушный пневматический соединитель трубы 10мм 8мм 6мм 4мм 12мм наружный диаметр шланга 1/8" 1/4" 3/8" 1/2" мужская резьба L-образные соединители фитингов

---

Air Pneumatic Straight Bulkhead Union Connector 10... Air Pneumatic Pipe Connector 10mm 8mm 6mm 4mm 12mm... Air Pneumatic 10mm 8mm 6mm 12mm 4mm 16mm OD Hose T... 3-Way Port Y Shape Air Pneumatic 12mm 8mm 10mm 6mm... Air Pneumatic 12mm 10mm 8mm 6mm 4mm Hose Tube 1/8"... Air Pneumatic 14mm 16mm Hose Tube 1/4" 1/8" 3/8" 1... Air Pipe Fitting 10mm 12mm 8mm 6mm 4mm Hose Tube 1... 3 Way T shaped Pneumatic Connector 4mm 6mm 8mm 10m...

Product Usage: The contact tube connection port for pneumatic piping , also can be used for various purposes depending on the user's condition.   Product information: Product name: Male thread elbow pneumatic connector Material: Plastic+brass Circlip: Stainless steel Working medium: Air,vacuum Normal Working pressure:0~0.9Mpa Low pressure use pressure: -99.99~0Kpa Highest pressure resistance: 1.3MPa Operating temperature range: 0~60°C Thread specification:1/8",1/4",3/8",1/2" Applicable hose: Nylon/PU tube Pipe outter diameter: 4mm/6mm/8mm/10mm/12mm Thread specifications: 01=1/8" ≈9.5~10mm 02=1/4" ≈12~12.7mm 03=3/8" ≈16~16.2mm 04=1/2"≈20~20.3mm   Specification: PL4-01  4mm to 1/8" male thread PL4-02  4mm to 1/4" male thread PL6-01  6mm to 1/8" male thread PL6-02  6mm to 1/4" male thread PL6-03  6mm to 3/8" male thread PL6-04  6mm to 1/2" male thread PL8-01  8mm to 1/8" male thread PL8-02  8mm to 1/4" male thread PL8-03  8mm to 3/8" male thread PL8-04  8mm to 1/2" male thread PL10-01 10mm to 1/8" male thread PL10-02 10mm to 1/4" male thread PL10-03 10mm to 3/8" male thread PL10-04 10mm to 1/2" male thread PL12-01 12mm to 1/8" male thread PL12-02 12mm to 1/4" male thread PL12-03 12mm to 3/8" male thread PL12-04 12mm to 1/2" male thread   Packing include:  1pc x pneumatic connector (type as you choose)   Features: 1. Quick installation, simple and smart, saves space. 2. Various forms to meet the needs of any pneumatic pipe. 3. Even after installation, the plastic pipe body can be arbitrarily turned. 4.The button adopts an elliptical design, which makes the disassembly more labor-saving and convenient. 5.All taper pipe threads are pre-coated with PTFE leak-proof glue, and the sealing performance is good. 6. The connectors are equipped with hexagon sockets for easy installation in narrow places.   Precautions: 1. If a non-company's trachea product is used, it may cause leakage or abnormal connection and disassembly due to the tolerance of the trachea. Therefore, it is necessary to check whether the outer diameter conforms to the tolerance allowable size. 2. Please check to see if the end face of the trachea is cut at right angles. If there is any damage or scratch outside the trachea, insert it into the end to ensure the seal. 3. When disassembling the air pipe, check that the pressure in the air pipe is zero.   Connection pipe precautions: (1) Make sure that the cut surface of the pipe is vertical, there is no damage on the outer circumference of the pipe and the pipe is not oval. (2) When inserting the pipe, it must be inserted into the bottom of the joint. If the pipe is not inserted, it may cause air leakage. (3) After the pipe is installed, pull the pipe to confirm that the pipe cannot be pulled out. Precautions when removing the joint: (4) Use a suitable tool to remove the pipe joint using the outer hexagon of the pipe joint (5) It is necessary to remove the sealing material adhered to the opposite side of the pipe joint. Otherwise the adhered sealing material may enter the peripheral components, causing malfunction   Use warning: 1. In the fluid other than air and water, try not to use 2. If it is used in a place where sparks are generated, it may cause a fire, so it is forbidden to use it in such a place.   Please Note: The size is measured by hands, please allow minor error of measurement. Photo color might be a little different from the actual product due to color display of different monitors.

 

---